ckt-title.jpg (17632 bytes)

CNC Mighty Turn - 71/ 75/ 79

specifi.jpg (8134 bytes)
CMT-71 CMT-75 CMT-79
Capacity Swing over bed 1800mm(71") 1900mm(75") 2000mm(79")
Swing over cross slide 1300mm(51") 1400mm(55") 1500mm(59")
Swing over gap *2100mm(82") *2200mm(86") *2300mm(90")
Width of gap *750mm(30")
Distance between center 1500mm / 2000mm / 3000mm / 4000mm / 5000mm / 6000mm / 7000mm / 8000mm
Headstock Spindle nose A2-15 / *A2-20, A2-28, special
Spindle bore 153mm(6") *230mm(9") *310mm(12") *406mm(16") *532mm(21")
Range of spindle speed 1~400 rpm 1~350 rpm 1~300 rpm 1~250 rpm 1~200 rpm
No. of spindle speed 4 2
Carriage Cross slide travel
Longitudinal travel
1600mm / 2100mm / 3100mm / 4100mm / 5100mm / 6100mm / 7100 mm / 8100mm
AC servo motor X:4kw(5.4HP) Z:7kw(12.1HP)
Rapid feed X:6m /min (236ipm) Z:6m/min(236ipm)
Cutting feed rate X/Z:0.001-500mm/rev (0.0004"-20"/rev)
Turret Tool station
H4/ *H6, V8
Size of external turning 32x32mm (1-1/4" x 1-1/4")
Boring bar dia. 60mm(2.3")
Tailstock Quill dia 280mm(11")
Quill stroke 250mm (10")
Taper of center MT NO.7
Motor Main spindle (continuous) AC 37 KW (50HP)
Main spindle
(30 min. rating)
AC 45 KW (60 HP)
Hydraulic pump 3.75kw(5HP)
Coolant pump 0.75kw(1HP)
Bed Width of bed 1120mm(44")
Control CNC control unit available FANUC, FAGOR, SIEMENS

OPT.Specification Subject to change without notice.