ckt-title.jpg (17632 bytes)

CLT 46/ 52/ 58


specifi.jpg (8134 bytes)
CLT-46 CLT-52 CLT-58
Capacity Swing over bed 1170mm(46") 1320mm(52") 1470mm(58")
Swing over cross slide 780mm(31") 940mm(37") 1100mm(43")
Distance between center 4200mm / 5200mm / 6200mm / 7200mm / 8200mm
Headstock Spindle nose A2-15 / *A2-20
Spindle bore 153mm(6") *230mm(9") *310mm(12")
Range of spindle speed 1~680 rpm 1~450 rpm 1~400 rpm
No. of spindle speed 4
Carriage Cross slide travel(X-axis) 610 mm (24")
Longitudinal travel(Z-axis) 4200 mm / 5200 mm / 6200 mm / 7200 mm / 8200 mm
AC servo motor X: 4 kw(5.4HP) Z: 7.9 kw(9.4HP)
Rapid feed X:6m/min(236ipm) Z:6m/min (236ipm)
Cutting feed rate X/Z: 0.001-500mm/rev(0.0004"-20"/rev)
Turret Tool station
V8 / *H4
Size of external turning 32x32mm (1-1/4" x 1-1/4")
Boring bar dia. 60mm(2.4")
Tailstock Quill dia 200mm(7.9")
Quoll strock 250mm(10")
Taper of center MT NO.6
Motor Main spindle (continuous) AC 37 KW(50HP)
Main spindle
(30 min. rating)
AC 45KW(60HP)
Hydraulic pump 3.75kw(5HP)
Coolant pump 0.75kw(1HP)
Bed Width of bed 1120 mm(44")
Width of way 1280 mm(50")
Control CNC control unit available FANUC, FAGOR,, SIEMENS

OPT.Specification Subject to change without notice.